|
Imperial Productions
®
Medallions
Sorted by Size
Standard and Custom Creations
|
Custom Maximum Colonial Disc 10
Feet Diameter
|
|
 |
A 150 Page Electronic Catalog for all
devices. This on line book covers all models, installation notes and
photographs for the Imperial Ceiling collections
Explore On Line Catalog |
|
 |
Custom Hole
Cutting & Splitting
Hole Cutting: Most
Medallions come with a 3-3/4" hole for access to the ceiling electrical
receptacle. The canopy of the medallion DOES NOT GO THROUGH THE
HOLE, and sits on the surface of the medallion. For certain
circumstances we can increase a hole size or cut a hole in a Rosette.
Splitting:
We offer the service of splitting a medallion so that one can lower the
canopy of the existing chandelier and slide the two split medallion
pieces under the canopy without taking down the chandelier. Remember
that when splitting, one looses the thickness of the blade so a perfect
circle is no longer. Use our approved adhesive and polyspackling
compound as a filler.
Explore
Our Services
|
|
 |
Historic
Reproductions
For the discerning
Residential client and Commercial projects we offer historic
reproductions of existing broken medallions. This involves supplying CAD
drawings or sending the damaged pieces to us. Product and service fees
are determined as per the number of units required and the complexity of
the job. We recommend either
GRGNeoPlasterTM
or
ArchPolymerTM
for the reconstruction.
Explore
Historic Services
|
|
 |
Fire Rating
For Residential
uses, Class A fire rating is not normally required however you must
check with your local building codes.
For Commercial
buildings all products used in construction must be Class A Fire Rated.
These structures include hospitality, medical, retail stores, and
Religious buildings. Fire Rating is achieved by the material being Class
A Fire rated such as
GRG-NeoPlasterTM.
In the case
of
ArchPolymerTM
specify fire retardant incorporated in the chemical mix.
Fire Rated primer
can be applied the surface of any material to achieve Class A. This
involves a coating specialist for inspections.
Explore
Fire Rating
|
|
 |
Metal Coating
All our products
and materials can be coated with real metal. Select from multiple metals
that are applied. So if you want a Brass ceiling medallion this can be
achieved.
Explore
Metal Coating
|
|
 |
Factory Painting
To save
installation time, preorder your ceiling products factory painted.
Provide us with the RAL color number and the finish of the paint. Most
designers specify an eggshell finish for mouldings and medallions,
however a monochrome flat paint has gained prominence.
Explore
Factory Painting
|
|
A
synthetic Plaster made from high density polymers
It is NOT a
plastic and looks just like plaster but is easier to install
Same
consistency as white pine but is very lite
Glue and
screw to ceilings, walls or doors
Optional
class A fire rating available
White Primed
ready to paint
Custom and
Standard Models available
Explore
ArchPolymerTM
|
|
A
new age Plaster made with calcium carbonate and resins
Very hard
and meets class A fire-rating standards
Glue and
screw or plaster into place
Prime and
paint by others
Custom and
Standard Models available
Explore GRG-NeoPlasterTM
|
|
 |
Most of our
Medallions can be made from this synaptic polymer with optional fire
rating. This allows medallions to fit into concave or convex vaults and
bulkheads. All are custom produced and there are some restrictions to
the models.
Explore
the Material |
|
ArchliteTM
is a PolyVinyl Composite Sheet ideal for laser straight through or
recessed cutting of flat decorative architectural products. Thickness 1/2"
water rot and insect resistant. Will not twist, Interior and Exterior use
|
 |
Back to
Main Medallions
|
Contact Us:
1-800-399-7585 email:
sales@imperialproductions.com |
|
  
|
|
* All Prices & specifications in this website subject to change without
notice |
|
* Prices are net, Freight, Taxes & Duties charged where applicable otherwise
client is responsible for remittance |
|
* Measurements are approximate only, Final Product may vary from this
website |
|
COPYRIGHT MRDCI Martin Richards Design and Contracting Inc, Martin Richards DesignTM
and Imperial
Productions®
Feb 2018 all rights
reserved
|
|
Last
Update JAN-26 |
|
