Find a medallion to fit chandlier canopy 4 inch and smaller

Beams Boiserie Coffers Domes Grills Medallions Rings Rosettes Tin-Ceilings Ceiling Trim Vaults Wall-Decor

Carvings Corbels Ceiling-Walls Columns-Cap-Base Cylinders Domes Facades Fireplace-Mantels Garden Kitchen-Posts

Legs Mouldings Niches Pediments Pilasters Railings Shutters Tin-Ceilings Finishes Ronan-Paint

Policy Commercial Custom-Dept Freight YouTube Catalogs Design Theory Materials Install-Products

Small Imperial medallions

Imperial Productions ®

Small Canopy Collection

Sorted by Canopy Size

4" to 4-7/8"

Small Canopy Collection

made from ArchPolymerTM / GRG-NeoPlasterTM / 24 Hardwoods / ResinMold®

Residential & Commercial Class-A Fire-Rated

Photo shows canopy

What is a Canopy?

The chandelier canopy does not go through the hole of the medallion. It sits up to the face of the medallion. This collection is sorted by the center flat area of the medallion around the hole. Your chandelier's canopy can cover this center flat area or you can allow it to cover part of the decorative pattern, thus the canopy can be larger than what is listed

Canopy 5" to 5-7/8"

Fast Track

to Canopy Size

up to ->

5-1/4" to 5-3/8"

5-1/2" to 5-5/8"

5-3/4" to 5-7/8"

Canopy to 4"

Item 1) Canopy up to 4" (10cm)	Buy Options	Materials






IPMED185 is a Victorian Neo Classical style medallion denoted by leaves and a ring of beads. Great for hallways, powder rooms, fitting or small chandeliers with a canopy up to 4" (10cm). Victorian style medallions are perfect for any decor from traditional to Beyond Modern decorating styles. This medallion is 17-1/4" (43.8cm). The center flat to the hole ring is 4" (10cm). It is available in ArchPolymerTM (a synthetic plaster) for interior and exterior use. For Vaulted ceilings specify Flexible ResinMold®. For Commercial and Public Buildings specify Fire Rated ArchPolymerTM or GRG-NeoPlasterTM (real plaster). Made in Canada

Item 2) Canopy up to 4" (10cm)	Buy Options	Materials






IPMED207H is an Art Deco style medallion with a center flat of 4" (10cm). Great for Beyond Modern potlights, or pendant lights. This medallion is 11" (27.94cm). It is available in ArchPolymerTM (a synthetic plaster) for interior and exterior use. For Vaulted ceilings specify Flexible ResinMold®. For Commercial and Public Buildings specify Fire Rated ArchPolymerTM or GRG-NeoPlasterTM (real plaster).

Item 3) Canopy up to 4" (10cm)	Buy Options	Materials






IPNP1044 is a Victorian style medallion denoted by Baroque design patterns. Great for hallways, powder rooms, fitting or small chandeliers with a canopy up to 4" (10cm). Victorian style medallions are perfect for any decor from traditional to Beyond Modern decorating styles. This medallion is 18" (45.72cm). The center flat to the hole ring is 4" (10cm). It is available in ArchPolymerTM (a synthetic plaster) for interior and exterior use. For Vaulted ceilings specify Flexible ResinMold®. For Commercial and Public Buildings specify Fire Rated ArchPolymerTM or GRG-NeoPlasterTM (real plaster).

Item 4) Canopy up to 4" (10cm)	Buy Options	Materials






The IPMED106 is an Art Deco style medallion denoted by concentric rings. Art Deco style medallions are perfect for any decor from traditional to Beyond Modern decorating styles. This medallion is 18" (45.72cm). We can create variations in carved hardwood. The center flat to the hole ring is 5-1/8". It is available in ArchPolymerTM (a synthetic plaster). For Vaulted ceilings specify Flexible ResinMold®. For Commercial and Public Buildings specify Fire Rated ArchPolymerTM or GRG-NeoPlasterTM (real plaster). Made in Canada

Item 5) Diameter 20-1/2" (52cm)	Buy Options	Materials






IPMED522 is a Neo Classical style Medallion denoted by Acanthus leaves. Suitable for any Traditional or Beyond Modern design. This medallion has a diameter of 20-1/2" (50.8cm). The center flat area is for a chandelier canopy is 4" (10cm) with a hole of 3-3/4" (9.5cm). It is available in ArchPolymerTM (a synthetic plaster) for interior and exterior use. For Vaulted ceilings specify Flexible ResinMold®. For Commercial and Public Buildings specify Fire Rated ArchPolymerTM or GRG-NeoPlasterTM (real plaster).

Item 6) Canopy up to 4" (10cm)	Buy Options	Materials






IPMED117 is a Victorian style medallion denoted by Baroque design patterns. This medallion has a diameter of 21-1/2" (54.6cm). The hole is 3-3/4" (9.5cm) and it fits a canopy up to 4" (10cm). One can specify the hole smaller for a chain. It is available in ArchPolymerTM (a synthetic plaster) for interior and exterior use. For Vaulted ceilings specify Flexible ResinMold®. For Commercial and Public Buildings specify Fire Rated ArchPolymerTM or GRG-NeoPlasterTM (real plaster). Made in Canada

Item 8) Canopy up to 4" (10cm)	Buy Options	Materials






IPMED179 is a Federal Style medallion has a diameter of 29-3/8" (74.6cm) and a projection of 1" (2.54cm). The hole is 3-1/4" (8.26cm). The radiating fan pattern is typical of the Federal style. It is available in ArchPolymerTM and custom made in GRGNeoPlasterTM, GFRC-ZeamentTM. Print the PDF Brochure to request a custom quote for options and volume orders Link to many of our custom options To Install buy the approved Adhesive and PolySpackling compound to fill any gaps between the ceiling and the medallion. Print the Brochure to request a custom quote for options and volume orders. Made in Canada

Item 9) Canopy up to 4" (10cm)	Buy Options	Materials






IPMED198 is a Federal style medallion denoted by an outer ring of beads. It is perfect for powder rooms or halls. This medallion has a diameter of 18-3/8" (46.6cm) with a projection of 1-1/8" (2.86cm). The center flat area is 5-1/2" (13.97cm). It is available in ArchPolymerTM (a synthetic plaster) for interior and exterior use. For Vaulted ceilings specify Flexible ResinMold®. For Commercial and Public Buildings specify Fire Rated ArchPolymerTM or GRG-NeoPlasterTM (real plaster). Alternate Sizes IPMED196-12" IPMED199-24" IPMED200-31"

Item 10) Canopy up to 4" (10cm)	Buy Options	Materials






IPMED199 is a Federal Style medallion has a diameter of 24" (60.96cm) and a projection of 1-1/8" (2.86cm). This Federal style is denoted by a ring of beads. It is available in ArchPolymerTM and custom made in GRGNeoPlasterTM, GFRC-ZeamentTM. Print the PDF Brochure to request a custom quote for options and volume orders Link to many of our custom options To Install buy the approved Adhesive and PolySpackling compound to fill any gaps between the ceiling and the medallion. Print the Brochure to request a custom quote for options and volume orders. Made in Canada

Item 11) Canopy up to 4" (10cm)	Buy Options	Materials






IPMED153 is a Neo Classical Style medallion depicting a ring of Acanthus Leaves. It has a diameter of 32-1/2" (82.55cm) and a projection of 3-7/16" (2.5cm). It fits a chandelier canopy up to 3-7/16" (12.7cm) which sits on the top of the medallion not through the hole. This exquisite medallion will enhance any sophisticated decor. It is suited for classical chandeliers and modern fixtures. It is available in ArchPolymerTM and custom made in GRGNeoPlasterTM, GFRC-ZeamentTM. Print the PDF Brochure to request a custom quote for options and volume orders Link to many of our custom options To Install buy the approved Adhesive and PolySpackling compound to fill any gaps between the ceiling and the medallion.

Item 12) Diameter 32-1/2" (82.23cm)	Buy Options	Materials






IPMED162 is a Victorian Medallion with a Diameter of 32-1/2" (82.55cm) and a projection of 2-1/8" (5.4cm) fitting a chandelier canopy up to 4-1/2" (15.2cm). Hole size is 4-1/2" (15.2cm). It is suitable for any exquisite decor with classical chandeliers or for an eclectic style utilizing modern fixtures. The Victorian/Baroque style is denoted by shells and leaves. For Vaulted ceilings specify Flexible ResinMold®. For Commercial and Public Buildings specify Fire Rated ArchPolymerTM or GRG-NeoPlasterTM (real plaster). Made in Canada

Item 13) Diameter 32-1/2" (82.55cm)	Buy Options	Materials






IPMED149 is an Art Nouveau style medallion with a diameter of 32-1/2" (82.55cm) and a projection of 1-5/8" (4.13cm). It fits a chandelier canopy up to 4" (10cm) which sits on the top of the medallion not through the hole. This nature inspired medallion is perfect for sunrooms and kitchens. It is best suited for a modern fixture. This Art Nouveau style is denoted by a Palm Leaves and Flowers. It is available in ArchPolymerTM and custom made from GRGNeoPlasterTM, GFRC-ZeamentTM. Print the PDF Brochure to request a custom quote for options and volume orders Link to many of our custom options To Install buy the approved Adhesive and PolySpackling compound to fill any gaps between the ceiling and the medallion. Print the Brochure to request a custom quote for options and volume orders.

Item 14) Canopy up to 4" (10cm)	Buy Options	Materials





IPNP1029H is an Art Nouveau style medallion and has a diameter of 33" (83.8cm) and a projection of 11-11/16" (4.3cm). The flat center ring around the hole is 4" (10cm) so it fits a chandelier canopy up to 4" (10cm) however larger canopies can be accommodated when it covers the inner acanthus leaves. The canopy sits on the top of the medallion not through the hole. This nature inspired medallion is perfect for sunrooms and kitchens. It is best suited for a modern fixture. This Art Nouveau style is denoted by a Palm Leaves, wheat sheaf and ribbons. It is available in ArchPolymerTM and custom made in GRGNeoPlasterTM, GFRC-ZeamentTM. Print the PDF Brochure to request a custom quote for options and volume orders Link to many of our custom options To Install buy the approved Adhesive and PolySpackling compound to fill any gaps between the ceiling and the medallion. Print the Brochure to request a custom quote for options and volume orders.

Canopy to 4"

Diameter 36"

Click Cards for Photos, Brochures, Movies & Buy Options



Options: Hole Size-Split Materials Factory Painted Metal Coated FireRated
* All Prices, Exchange and Specifications Subject to Change without Notice * All designs & content copyrighted 2025 ImperialProductions® or Permissions Granted Made in Canada

Canopy to 4"

Diameter 36"

Click Cards for Photos, Brochures, Movies & Buy Options

Options: Hole Size-Split Materials Factory Painted Metal Coated FireRated

* All Prices, Exchange and Specifications Subject to Change without Notice

* All designs & content copyrighted 2025 ImperialProductions® or Permissions Granted

* Made in Canada

Item 18) Canopy up to 4" (10cm)	Buy Options	Materials






IPMED180 is a Federal Style medallion has a diameter of 44-9/16" (113.2cm) and a projection of 1-7/8" (4.76cm). It fits a chandelier canopy up to 4" (10cm) which sits on the top of the medallion not through the hole. It is suited for classical chandeliers and modern fixtures. This Federal style is denoted by torches and palm leaves. It is available in ArchPolymerTM and custom made in GRGNeoPlasterTM, GFRC-ZeamentTM. Print the PDF Brochure to request a custom quote for options and volume orders Link to many of our custom options To Install buy the approved Adhesive and PolySpackling compound to fill any gaps between the ceiling and the medallion.

Canopy to 4-3/16"

Diameter 34-1/2"

Click Cards for Photos, Brochures, Movies & Buy Options



Options: Hole Size-Split Materials Factory Painted Metal Coated FireRated
* All Prices, Exchange and Specifications Subject to Change without Notice * All designs & content copyrighted 2025 ImperialProductions® or Permissions Granted

Canopy to 4-1/4"

Item 20) Canopy up to 4-1/4" (10.8cm)	Buy Options	Materials






IPMED100 is a Federal style medallion denoted by an outer ring of egg and dart. It is perfect for powder rooms or halls. This medallion has a diameter of 12-1/2" (31.75cm) with a projection of 3/4" (1.9cm). The center flat area is 4-1/4" (10.8cm). It is available in ArchPolymerTM (a synthetic plaster) for interior and exterior use. For Vaulted ceilings specify Flexible ResinMold®. For Commercial and Public Buildings specify Fire Rated ArchPolymerTM or GRG-NeoPlasterTM (real plaster).

Item 21) Canopy up to 4-1/4" (10.8cm)	Buy Options	Materials





IPMED506 is a Federal Neo Classical style medallion denoted by an Egg & Dart Ring. Great for hallways, powder rooms, fitting or small chandeliers with a canopy up to 4-1/4" (10.8cm). Federal style medallions are perfect for any decor from traditional to Beyond Modern decorating styles. This medallion is 17-1/2" (44.45cm). The center flat to the hole ring is 4-1/4" (10.8cm). It is available in ArchPolymerTM (a synthetic plaster) for interior and exterior use. For Vaulted ceilings specify Flexible ResinMold®. For Commercial and Public Buildings specify Fire Rated ArchPolymerTM or GRG-NeoPlasterTM (real plaster). Made in Canada

Item 22) Canopy up to 4-1/4" (10.8cm)	Buy Options	Materials






The IPMED107 is a Federal Neo Classical style medallion denoted by an Egg and Dart Ring. Great for any room fitting chandeliers with a canopy up to 4-1/4" (10.8cm). Federal style medallions are perfect for any decor from traditional to Beyond Modern decorating styles. The diameter is 18" (45.72cm). The center flat to the hole ring is 4-1/4" (10.8cm). It is available in ArchPolymerTM (a synthetic plaster) for interior and exterior use. For Vaulted ceilings specify Flexible ResinMold®. For Commercial and Public Buildings specify Fire Rated ArchPolymerTM or GRG-NeoPlasterTM (real plaster). Made in Canada

Item 23) Canopy up to 4-1/4" (10.8cm)	Buy Options	Materials





IPNP1040H is a Federal Style medallion with a diameter of 27" (68.58cm) and a projection of 2-1/2" (6.35cm). The hole is the standard size of 3-1/4" (8.26cm). This Federal style is denoted by a ring of Acanthus leaves. It is available in ArchPolymerTM and custom made in GRGNeoPlasterTM, GFRC-ZeamentTM. Print the PDF Brochure to request a custom quote for options and volume orders Link to many of our custom options To Install buy the approved Adhesive and PolySpackling compound to fill any gaps between the ceiling and the medallion.

Canopy 4-1/2"

Item 25) Canopy up to 4-1/2" (11.43cm)	Buy Options	Materials






IPMED108 is a Federal Neo Classical style medallion denoted by a Bead Ring. Great for any room fitting chandeliers with a canopy up to 4-1/2" (11.43cm). Federal style medallions are perfect for any decor from traditional to Beyond Modern decorating styles. The diameter is 18" (45.72cm). It is available in ArchPolymerTM (a synthetic plaster) for interior and exterior use. For Vaulted ceilings specify Flexible ResinMold®. For Commercial and Public Buildings specify Fire Rated ArchPolymerTM or GRG-NeoPlasterTM (real plaster). Made in Canada

Item 26) Canopy up to 4-1/2" (11.4cm)	Buy Options	Materials





IPNP1050 is a Federal style medallion denoted by concentric rings and a center bead. It is perfect for wall and ceiling decoration and chandelier or fan styles. This rosette has a diameter of 20-1/2" (52cm) with a projection of 1" (2.54cm). The center flat area is suitable for a chandelier canopy up to 4-1/2" (11.4cm). The hole is the standard 3-3/4" (9.5cm). It is available in ArchPolymerTM (a synthetic plaster) for interior and exterior use. For Vaulted ceilings specify Flexible ResinMold®. For Commercial and Public Buildings specify Fire Rated ArchPolymerTM or GRG-NeoPlasterTM (real plaster).

Item 27) Canopy up to 4-1/2" (11.4cm)	Buy Options	Materials






IPMED514 is a Federal Style medallion has a diameter of 24" (60.96cm) and a projection of 1" (2.54cm). It fits a chandelier canopy up to 4-1/2" (11.4cm) which sits on the top of the medallion not through the hole. This exquisite medallion will enhance any sophisticated decor. It is suited for classical chandeliers and modern fixtures. This Federal style is denoted by an a circle of beads on the outer ring. It is available in ArchPolymerTM and custom made in GRGNeoPlasterTM, GFRC-ZeamentTM. Print the PDF Brochure to request a custom quote for options and volume orders Link to many of our custom options To Install buy the approved Adhesive and PolySpackling compound to fill any gaps between the ceiling and the medallion. Print the Brochure to request a custom quote for options and volume orders. Made in Canada

Item 28) Canopy up to 4" or 8"	Buy Options	Materials






IPMED199 is a Federal Style medallion has a diameter of 24" (60.96cm) and a projection of 1-1/8" (2.86cm). This Federal style is denoted by a ring of beads. It is available in ArchPolymerTM and custom made in GRGNeoPlasterTM, GFRC-ZeamentTM. Print the PDF Brochure to request a custom quote for options and volume orders Link to many of our custom options To Install buy the approved Adhesive and PolySpackling compound to fill any gaps between the ceiling and the medallion. Print the Brochure to request a custom quote for options and volume orders. Made in Canada

Item 29) Canopy up to 4-1/2" (11.43cm)	Buy Options	Materials





IPNP1067H is a Beyond Modern medallion which is perfect for wall or ceiling design. This unique fan like pattern is a focal point for any modern room. It has a diameter of 24" (60.96cm) and a projection of 3" (7.6cm). It fits a canopy of 4-1/2" (11.43cm). It is available in ArchPolymerTM (a synthetic plaster) for interior and exterior use. For Commercial and Public Buildings specify Fire Rated ArchPolymerTM or GRGNeoPlasterTM (a new age real plaster).

Item 30) Canopy up to 4" to 8"	Buy Options	Materials






IPMED201 is a Federal Style medallion has a diameter of 24-3/8" (61.9cm) and a projection of 1-3/4" (4.45cm). This Federal style is denoted by a of torches. It is available in ArchPolymerTM and custom made in GRGNeoPlasterTM, GFRC-ZeamentTM. Print the PDF Brochure to request a custom quote for options and volume orders Link to many of our custom options To Install buy the approved Adhesive and PolySpackling compound to fill any gaps between the ceiling and the medallion. Print the Brochure to request a custom quote for options and volume orders. Made in Canada

Item 31) Canopy up to 4-1/2" (11.4cm)	Buy Options	Materials






IPMED127 is a Federal Style medallion has a diameter of 25-1/8" (63.8cm) and a projection of 1-1/8" (2.86cm). The hole is the standard size of 3-3/4" (9.5cm). This Federal style is denoted by a ring of palm leaves with an inner bead. It is available in ArchPolymerTM and custom made in GRGNeoPlasterTM, GFRC-ZeamentTM. Print the PDF Brochure to request a custom quote for options and volume orders Link to many of our custom options To Install buy the approved Adhesive and PolySpackling compound to fill any gaps between the ceiling and the medallion. Print the Brochure to request a custom quote for options and volume orders. Made in Canada

Item 33) Canopy up to 4-1/2" (11.4cm)	Buy Options	Materials





IPMED177 is an Art Deco style medallion denoted by a concave design around a center ring. Art Deco style medallions are perfect for any decor from traditional to Beyond Modern decorating styles. This medallion is 24-3/8" (61.91cm). We can create variations in carved hardwood. The center flat to the hole ring is 5-1/2" (14cm). It is available in ArchPolymerTM (a synthetic plaster). For Vaulted ceilings specify Flexible ResinMold®. For Commercial and Public Buildings specify Fire Rated ArchPolymerTM or GRG-NeoPlasterTM (real plaster).

Item 40) Canopy up to 4-1/2" (11.43cm)	Buy Options	Materials






IPMED137H is a Victorian/Renaissance Revival style Medallion denoted by central Acanthus leaves and radiating petals. Great for any elegant ceiling or wall decor. This Rosette is 28" (71.16cm) diameter. It is available in ArchPolymerTM (a synthetic plaster) for interior and exterior use. For Vaulted ceilings specify Flexible ResinMold®. For Commercial and Public Buildings specify Fire Rated ArchPolymerTM or GRG-NeoPlasterTM (real plaster).

Item 41) Canopy up to 4-1/2" (11.4cm)	Buy Options	Materials





IPNP1001H is a Victorian Medallion 30-1/2" x 20" (77.47 x 50.2cm) and a projection of 1-1/2" (3.8cm) fitting a chandelier canopy up to 4-1/2" (11.4cm). One can Specify a hole size beyond 3-3/4". It is suitable for any exquisite decor with classical chandeliers or for an eclectic style utilizing modern fixtures. The Victorian/Baroque style is denoted by Rinceau scrolls. For Vaulted ceilings specify Flexible ResinMold®. For Commercial and Public Buildings specify Fire Rated ArchPolymerTM or GRG-NeoPlasterTM (real plaster).

Canopy up to 4-1/2"

Diameter 32-1/2"

Click Cards for Photos, Brochures, Movies & Buy Options



Options: Hole Size-Split Materials Factory Painted Metal Coated FireRated
* All Prices, Exchange and Specifications Subject to Change without Notice * All designs & content copyrighted 2025 ImperialProductions® or Permissions Granted

Item 37) Rectangle Canopy 4-1/2" or less	Buy Options	Materials





Options: Custom Size Fire-Rated Material Made in Canada

Canopy to 4-3/4"

Item 38) Canopy up to 4-3/4" (12cm)	Buy Options	Materials






IPNP1049 is a Victorian style medallion denoted by 4 Appliqués and a ribbon border. Great for hallways, powder rooms, fitting or small chandeliers with a canopy up to 4-3/4" (12cm). Victorian style medallions are perfect for any decor from traditional to Beyond Modern decorating styles. This medallion is 18" (45.72cm). The center flat to the hole ring is 4-3/4" (12cm). It is available in ArchPolymerTM (a synthetic plaster) for interior and exterior use. For Vaulted ceilings specify Flexible ResinMold®. For Commercial and Public Buildings specify Fire Rated ArchPolymerTM or GRG-NeoPlasterTM (real plaster).

Item 39) Canopy up to 4-3/4" (12.7cm)	Buy Options	Materials






IPNP1047 is a Victorian style medallion denoted by 4 Appliqués and a ribbon border. Great for hallways, powder rooms, fitting or small chandeliers with a canopy up to 4-3/4" (12cm). Victorian style medallions are perfect for any decor from traditional to Beyond Modern decorating styles. This medallion is 18" (45.72cm). The center flat to the hole ring is 4-3/4" (12cm). It is available in ArchPolymerTM (a synthetic plaster) for interior and exterior use. For Vaulted ceilings specify Flexible ResinMold®. For Commercial and Public Buildings specify Fire Rated ArchPolymerTM or GRG-NeoPlasterTM (real plaster).

Item 40) Canopy up to 4-3/4" (12cm)	Buy Options	Materials






IPNP1048 is a Victorian style medallion denoted by 4 Appliqués and a ribbon border. Great for hallways, powder rooms, fitting or small chandeliers with a canopy up to 4-3/4" (12cm). Victorian style medallions are perfect for any decor from traditional to Beyond Modern decorating styles. This medallion is 18" (45.72cm). The center flat to the hole ring is 4-3/4" (12cm). It is available in ArchPolymerTM (a synthetic plaster) for interior and exterior use. For Vaulted ceilings specify Flexible ResinMold®. For Commercial and Public Buildings specify Fire Rated ArchPolymerTM or GRG-NeoPlasterTM (real plaster).

Item 41) Canopy up to 4-3/4" 12cm)	Buy Options	Materials






IPNP1066 is a Federal Neo Classical style medallion denoted by Acanthus Leaves and a Floral Ring. Great for any room fitting chandeliers with a canopy up to 4-3/4" (12cm). Federal style medallions are perfect for any decor from traditional to Beyond Modern decorating styles. The diameter is 18" (45.72cm). It is available in ArchPolymerTM (a synthetic plaster) for interior and exterior use. For Vaulted ceilings specify Flexible ResinMold®. For Commercial and Public Buildings specify Fire Rated ArchPolymerTM or GRG-NeoPlasterTM (real plaster).

Item 42) Canopy up to 4-3/4" (12cm)	Buy Options	Materials





IPMED501 is a Colonial style medallion and has a diameter of 20" (50.8cm) and a projection of 1-1/2" (3.8cm). The hole is 4-1/8" (10.48cm). The flat center ring around hole is 4-3/4" (12cm) so it fits a chandelier canopy up to 4-3/4" (12cm) however larger canopies can be accommodated when it covers the inner ring. The canopy sits on the top of the medallion not through the hole. This Colonial medallion has a simple design allowing it to be used with any style of chandelier. It is available in ArchPolymerTM and GRGNeoPlasterTM. Print the PDF Brochure to request a custom quote for options such as splitting and volume orders Link to many of our custom options To Install buy the approved Adhesive and PolySpackling compound to fill any gaps between the ceiling and the medallion. Made in Canada

Item 43) Diameter 22" (55.88cm)	Buy Options	Materials





IPMED507 is a Neo Classical style Medallion denoted by a hole surrounded by Acanthus leaves and a ring of beads. Great for any elegant decor. This medallion has a 22" (55.88cm) diameter. The center flat area is for a chandelier canopy of 4-3/4" (12cm) with a hole of 3-3/4" (9.5cm). It is available in ArchPolymerTM (a synthetic plaster) for interior and exterior use. For Vaulted ceilings specify Flexible ResinMold®. For Commercial and Public Buildings specify Fire Rated ArchPolymerTM or GRG-NeoPlasterTM (real plaster).

Item 27) Canopy up to 4-3/4" (12.7cm)	Buy Options	Materials






IPMED156 is a Neo Classical Style medallion depicting Acanthus Leaves. It has a diameter of 32-1/2" (82.55cm) and a projection of 2" (5cm). It fits a chandelier canopy up to 4-3/4" (12.7cm) which sits on the top of the medallion not through the hole. This exquisite medallion will enhance any sophisticated decor. It is suited for classical chandeliers and modern fixtures. It is available in ArchPolymerTM and custom made in GRGNeoPlasterTM, GFRC-ZeamentTM. Print the PDF Brochure to request a custom quote for options and volume orders Link to many of our custom options To Install buy the approved Adhesive and PolySpackling compound to fill any gaps between the ceiling and the medallion.

Item 44) Canopy up to 4-3/4" (12.7cm)	Buy Options	Materials





IPMRD8012 is an oval Art Deco style medallion denoted by oval layers. Art Deco style medallions are perfect for any decor from traditional to Beyond Modern decorating styles. This medallion is 42" x 28" (106.7 x 71.12cm). The center hole is 3-3/4" (9.5cm). It is available in ArchPolymerTM (a synthetic plaster). For Vaulted ceilings specify Flexible ResinMold®. For Commercial and Public Buildings specify Fire Rated ArchPolymerTM or GRG-NeoPlasterTM (real plaster).