Imperial Productions ®

 Federal Style

 Neo Classical Style 1780-1850

 A Sophisticated Design

 

Fast Track  to Sizes	12" to 17-3/4"	18" to 19-3/4"	20" to 24"
	24-1/4" to 30"	31" to 36"	37" to 70"

 

Diameters from 12" x 17-3/4"

 

Item 1) Diameter 12-5/16" (31.2cm)		Buy Options	Materials
IPMED197 is a Federal style medallion denoted by an outer ring of beads. It is perfect for powder rooms or halls. This medallion has a diameter of 12-5/16" (31.2cm) with a projection of 11/16" (1.76cm).  The center flat area is 5-1/2" (13.97cm).  It is available in ArchPolymerTM (a synthetic plaster) for interior and exterior use.  For Vaulted ceilings specify Flexible ResinMold®. For Commercial and Public Buildings specify Fire Rated ArchPolymerTM or GRG-NeoPlasterTM (real plaster).   Alternate Sizes  IPMED198-18"   IPMED199-24"   IPMED200-31"

 

Item 2) Diameter 12-1/2" (31.75cm)		Buy Options	Materials
IPMED100 is a Federal style medallion denoted by an outer ring of egg and dart. It is perfect for powder rooms or halls. This medallion has a diameter of 12-1/2" (31.75cm) with a projection of 3/4" (1.9cm).  The center flat area is 4-1/4" (10.8cm).  It is available in ArchPolymerTM (a synthetic plaster) for interior and exterior use.  For Vaulted ceilings specify Flexible ResinMold®. For Commercial and Public Buildings specify Fire Rated ArchPolymerTM or GRG-NeoPlasterTM (real plaster).

 

Item 3) Diameter 12-1/2" (31.75cm)		Buy Options	Materials
IPNP1058 is a Federal style medallion denoted by an outer ring of beads. It is perfect for powder rooms or halls and pot lights . This medallion has a diameter of 12-3/4" (32.38cm) with a projection of 1" (2.54cm).  The center flat area for chandelier canopy or pot light cover plate is 6-1/2" (16.5cm).  It is available in ArchPolymerTM (a synthetic plaster) for interior and exterior use.  For Vaulted ceilings specify Flexible ResinMold®. For Commercial and Public Buildings specify Fire Rated ArchPolymerTM or GRG-NeoPlasterTM (real plaster).

 

Item 4) Diameter 12-1/2" (31.75cm)		Buy Options	Materials
IPMED300 is a Federal style medallion-rosette denoted by an outer ring of beads and center flower. It is perfect for ceiling and wall decoration . This medallion has a diameter of 12-3/4" (32.38cm) with a projection of 1" (2.54cm). It is available in ArchPolymerTM (a synthetic plaster) for interior and exterior use.  For Vaulted ceilings specify Flexible ResinMold®. For Commercial and Public Buildings specify Fire Rated ArchPolymerTM or GRG-NeoPlasterTM (real plaster).

 

Item 5) Diameter 12-1/2" (31.75cm)		Buy Options	Materials
IPMED301 is a Federal style medallion-rosette denoted by an outer ring of beads and center flower. It is perfect for ceiling and wall decoration . This medallion has a diameter of 12-3/4" (32.38cm) with a projection of 1" (2.54cm). It is available in ArchPolymerTM (a synthetic plaster) for interior and exterior use.  For Vaulted ceilings specify Flexible ResinMold®. For Commercial and Public Buildings specify Fire Rated ArchPolymerTM or GRG-NeoPlasterTM (real plaster).

 

Item 6) Diameter 12-1/2" (31.75cm)		Buy Options	Materials
IPMED302 is a Federal style medallion-rosette denoted by an outer ring of beads and center flower. It is perfect for ceiling and wall decoration . This medallion has a diameter of 12-3/4" (32.38cm) with a projection of 1" (2.54cm). It is available in ArchPolymerTM (a synthetic plaster) for interior and exterior use.  For Vaulted ceilings specify Flexible ResinMold®. For Commercial and Public Buildings specify Fire Rated ArchPolymerTM or GRG-NeoPlasterTM (real plaster).

 

Item 7) Diameter 15" (38.1cm)		Buy Options	Materials
IPNP1023 is a Federal style medallion-rosette denoted by a palm leaf flower. It is perfect for ceiling and wall decoration . This medallion has a diameter of 15" (38.1cm) with a projection of 1-3/4" (4.45cm). It is available in ArchPolymerTM (a synthetic plaster) for interior and exterior use.  For Vaulted ceilings specify Flexible ResinMold®. For Commercial and Public Buildings specify Fire Rated ArchPolymerTM or GRG-NeoPlasterTM (real plaster).

 

Item 8) Diameter 15" (38.1cm)		Buy Options	Materials
IPNP1023H is a Federal style medallion denoted by a palm leaf flower. It is perfect for a ceiling medallion for powder rooms, and hallways. This medallion has a diameter of 15" (38.1cm) with a projection of 1-3/4" (4.45cm). It fits a chandelier canopy of 3" (7.62cm). It is available in ArchPolymerTM (a synthetic plaster) for interior and exterior use.  For Vaulted ceilings specify Flexible ResinMold®. For Commercial and Public Buildings specify Fire Rated ArchPolymerTM or GRG-NeoPlasterTM (real plaster).

 

Item 9) Diameter 15-5/8" (39.68cm)		Buy Options	Materials
IPNP1056 is a Federal style medallion denoted by a petals. It is perfect for a ceiling medallion for powder rooms, and hallways. This medallion has a diameter of 15-5/8" (39.68cm) with a projection of 3/4" (1.9cm). It fits a chandelier canopy of 5" (12.7cm) or is perfect for pot lights. It is available in ArchPolymerTM (a synthetic plaster) for interior and exterior use.  For Vaulted ceilings specify Flexible ResinMold®. For Commercial and Public Buildings specify Fire Rated ArchPolymerTM or GRG-NeoPlasterTM (real plaster).

 

Item 10) Diameter 15-5/8" (39.68cm)		Buy Options	Materials
IPMED320 is a Federal style Rosette denoted by a petals with a center flower. It is perfect for ceilings and wall decoration. This rosette has a diameter of 15-5/8" (39.68cm) with a projection of 1" (2.54cm). It is available in ArchPolymerTM (a synthetic plaster) for interior and exterior use.  For Vaulted ceilings specify Flexible ResinMold®. For Commercial and Public Buildings specify Fire Rated ArchPolymerTM or GRG-NeoPlasterTM (real plaster).

 

Item 11) Diameter 15-5/8" (39.68cm)		Buy Options	Materials
IPMED321 is a Federal style Rosette denoted by a petals with a center flower. It is perfect for ceilings and wall decoration. This rosette has a diameter of 15-5/8" (39.68cm) with a projection of 1" (2.54cm). It is available in ArchPolymerTM (a synthetic plaster) for interior and exterior use.  For Vaulted ceilings specify Flexible ResinMold®. For Commercial and Public Buildings specify Fire Rated ArchPolymerTM or GRG-NeoPlasterTM (real plaster).

 

Item 12) Diameter 15-5/8" (39.68cm)		Buy Options	Materials
IPMED322 is a Federal style Rosette denoted by a petals with a center flower. It is perfect for ceilings and wall decoration. This rosette has a diameter of 15-5/8" (39.68cm) with a projection of 1" (2.54cm). It is available in ArchPolymerTM (a synthetic plaster) for interior and exterior use.  For Vaulted ceilings specify Flexible ResinMold®. For Commercial and Public Buildings specify Fire Rated ArchPolymerTM or GRG-NeoPlasterTM (real plaster).

 

Item 13) Diameter 15-3/4" (40cm)		Buy Options	Materials
IPNP1005H is a Federal style medallion denoted by Acanthus Leaves. It is perfect for a ceiling medallion for powder rooms, and hallways. This medallion has a diameter of 15-3/4" (40cm) with a projection of 2-1/2" (6.35cm). It fits a chandelier canopy of 2-1/2" (6.35cm). It is available in ArchPolymerTM (a synthetic plaster) for interior and exterior use.  For Vaulted ceilings specify Flexible ResinMold®. For Commercial and Public Buildings specify Fire Rated ArchPolymerTM or GRG-NeoPlasterTM (real plaster).

 

Item 14) Diameter 15-3/4" (40cm)		Buy Options	Materials
IPNP1005 is a Federal style rosette denoted by Acanthus Leaves. It is perfect for a ceiling medallion for powder rooms, and hallways. This medallion has a diameter of 15-3/4" (40cm) with a projection of 2-1/2" (6.35cm). It is perfect for wall and ceiling decor. It is available in ArchPolymerTM (a synthetic plaster) for interior and exterior use.  For Vaulted ceilings specify Flexible ResinMold®. For Commercial and Public Buildings specify Fire Rated ArchPolymerTM or GRG-NeoPlasterTM (real plaster).

 

Item 15) Diameter 16-1/2" (41.9cm)		Buy Options	Materials
IPNP1021 is a Federal style rosette denoted by Bead & Barrel Ring. It is perfect for a ceiling medallion for powder rooms, and hallways or a rosette for the ceiling or wall. This medallion has a diameter of 16-1/2" (41.9cm) with a projection of 1-3/8" (3.5cm). It is perfect for wall and ceiling decor. It is available in ArchPolymerTM (a synthetic plaster) for interior and exterior use.  For Vaulted ceilings specify Flexible ResinMold®. For Commercial and Public Buildings specify Fire Rated ArchPolymerTM or GRG-NeoPlasterTM (real plaster).

 

Item 16) Diameter 16-1/2" (41.9cm)		Buy Options	Materials
IPNP1021H is a Federal style rosette denoted by Bead & Barrel Ring. It is perfect for a ceiling medallion for powder rooms, and hallways or a rosette for the ceiling or wall. This medallion has a diameter of 16-1/2" (41.9cm) with a projection of 1-3/8" (3.5cm). It is perfect for wall and ceiling decor. It is available in ArchPolymerTM (a synthetic plaster) for interior and exterior use.  For Vaulted ceilings specify Flexible ResinMold®. For Commercial and Public Buildings specify Fire Rated ArchPolymerTM or GRG-NeoPlasterTM (real plaster).

 

Item 17)  Diameter 17" (43.18cm)		Buy Options	Materials
IPMED187 is a Federal Neo Classical style medallion denoted by Palm leaves and beads. Great for hallways, powder rooms, fitting or small chandeliers with a canopy up to 5" (12.7cm).  Federal style medallions are perfect for any decor from traditional to Beyond Modern decorating styles. This medallion is 17" (43.18cm). The center flat to the hole ring is 5" (12.7cm).  It is available in ArchPolymerTM (a synthetic plaster) for interior and exterior use.  For Vaulted ceilings specify Flexible ResinMold®. For Commercial and Public Buildings specify Fire Rated ArchPolymerTM or GRG-NeoPlasterTM (real plaster).  Made in Canada

 

Item 18)  Diameter 17" (43.18cm)		Buy Options	Materials
IPMED103 is a Federal Neo Classical style medallion denoted by a ribbon. Great for hallways, powder rooms, fitting or small chandeliers with a canopy up to 5" (12.7cm).  Federal style medallions are perfect for any decor from traditional to Beyond Modern decorating styles. This medallion is 17" (43.18cm). The center flat to the hole ring is 5" (12.7cm).  It is available in ArchPolymerTM (a synthetic plaster) for interior and exterior use.  For Vaulted ceilings specify Flexible ResinMold®. For Commercial and Public Buildings specify Fire Rated ArchPolymerTM or GRG-NeoPlasterTM (real plaster).  Made in Canada

 

Item 19)  Diameter 17-1/4" (43.8cm)		Buy Options	Materials
IPMED104 is a Federal Neo Classical style Rosette denoted by a center flower, petels and an egg & dart ring. Great for ceiling and wall decoration. Federal style medallions are perfect for any decor from traditional to Beyond Modern decorating styles. This medallion is 17-1/4" (43.8cm).  It is available in ArchPolymerTM (a synthetic plaster) for interior and exterior use.  For Vaulted ceilings specify Flexible ResinMold®. For Commercial and Public Buildings specify Fire Rated ArchPolymerTM or GRG-NeoPlasterTM (real plaster).  Made in Canada

 

Item 20)  Diameter 17-1/2" (44.45cm)		Buy Options	Materials
The IPMED506 is a Federal Neo Classical style medallion denoted by an Egg & Dart Ring. Great for hallways, powder rooms, fitting or small chandeliers with a canopy up to 4-1/4" (10.8cm).  Federal style medallions are perfect for any decor from traditional to Beyond Modern decorating styles. This medallion is 17-1/2" (44.45cm). The center flat to the hole ring is 4-1/4" (10.8cm).  It is available in ArchPolymerTM (a synthetic plaster) for interior and exterior use.  For Vaulted ceilings specify Flexible ResinMold®. For Commercial and Public Buildings specify Fire Rated ArchPolymerTM or GRG-NeoPlasterTM (real plaster).  Made in Canada

 

Diameters from 18" x 19-3/4"

Item 21)  Diameter 18" (45.72cm)		Buy Options	Materials
IPMED521 is a Federal Neo Classical style medallion denoted by a ribbon of beads and barrel. Great for hallways, powder rooms, fitting or small chandeliers with a canopy up to 5" (12.7cm).  Federal style medallions are perfect for any decor from traditional to Beyond Modern decorating styles. This medallion is 18" (45.72cm). The center flat to the hole ring is 5" (12.7cm).  It is available in ArchPolymerTM (a synthetic plaster) for interior and exterior use.  For Vaulted ceilings specify Flexible ResinMold®. For Commercial and Public Buildings specify Fire Rated ArchPolymerTM or GRG-NeoPlasterTM (real plaster).  Made in Canada

Item 22)  18" x 18" (45.7cm)		Buy Options	Materials
The IPNP1042 is a Federal Neo Classical style medallion denoted by a series of Anthemions. Great for hallways, powder rooms, fitting or small chandeliers with a canopy up to 5" (12.7cm).  Federal style medallions are perfect for any decor from traditional to Beyond Modern decorating styles. This Octagon medallion is 18" (45.72cm). The center flat to the hole ring is 5" (12.7cm).  It is available in ArchPolymerTM (a synthetic plaster) for interior and exterior use.  For Vaulted ceilings specify Flexible ResinMold®. For Commercial and Public Buildings specify Fire Rated ArchPolymerTM or GRG-NeoPlasterTM (real plaster).

Item 23)  Diameter 18" (45.7cm)		Buy Options	Materials
The IPMED107 is a Federal Neo Classical style medallion denoted by an Egg and Dart Ring. Great for any room fitting chandeliers with a canopy up to 4-1/4" (10.8cm).  Federal style medallions are perfect for any decor from traditional to Beyond Modern decorating styles. The diameter is 18" (45.72cm). The center flat to the hole ring is 4-1/4" (10.8cm).  It is available in ArchPolymerTM (a synthetic plaster) for interior and exterior use.  For Vaulted ceilings specify Flexible ResinMold®. For Commercial and Public Buildings specify Fire Rated ArchPolymerTM or GRG-NeoPlasterTM (real plaster).

Item 24)  Diameter 18" (45.7cm)		Buy Options	Materials
The IPMED108 is a Federal Neo Classical style medallion denoted by a Bead Ring. Great for any room fitting chandeliers with a canopy up to 4-1/2" (11.43cm).  Federal style medallions are perfect for any decor from traditional to Beyond Modern decorating styles. The diameter is 18" (45.72cm). It is available in ArchPolymerTM (a synthetic plaster) for interior and exterior use.  For Vaulted ceilings specify Flexible ResinMold®. For Commercial and Public Buildings specify Fire Rated ArchPolymerTM or GRG-NeoPlasterTM (real plaster).

Item 25)  Diameter 18" (45.7cm)		Buy Options	Materials
IPMED196 is a Federal Neo Classical style medallion denoted by Swirls and a Bead Ring. Great for any room fitting chandeliers with a canopy up to 4-1/2" (11.43cm).  Federal style medallions are perfect for any decor from traditional to Beyond Modern decorating styles. The diameter is 18" (45.72cm). It is available in ArchPolymerTM (a synthetic plaster) for interior and exterior use.  For Vaulted ceilings specify Flexible ResinMold®. For Commercial and Public Buildings specify Fire Rated ArchPolymerTM or GRG-NeoPlasterTM (real plaster).

Item 26)  Diameter 18" (45.7cm)		Buy Options	Materials
IPNP1066 is a Federal Neo Classical style medallion denoted by Acanthus Leaves and a Floral Ring. Great for any room fitting chandeliers with a canopy up to 4-3/4" (12cm).  Federal style medallions are perfect for any decor from traditional to Beyond Modern decorating styles. The diameter is 18" (45.72cm). It is available in ArchPolymerTM (a synthetic plaster) for interior and exterior use.  For Vaulted ceilings specify Flexible ResinMold®. For Commercial and Public Buildings specify Fire Rated ArchPolymerTM or GRG-NeoPlasterTM (real plaster).

Item 27)  18"x18" (45.7cm)		Buy Options	Materials
IPNP1043 is a Federal Neo Classical style medallion denoted by a Greek Key Design. Great for any room fitting chandeliers with a canopy up to 5" x 5" (12.7cm).  Federal style medallions are perfect for any decor from traditional to Beyond Modern decorating styles. The size is 18" x 18" (45.7 x 45.7cm). It is available in ArchPolymerTM (a synthetic plaster) for interior and exterior use.  For Vaulted ceilings specify Flexible ResinMold®. For Commercial and Public Buildings specify Fire Rated ArchPolymerTM or GRG-NeoPlasterTM (real plaster).

Item 28) Diameter 18-3/8" (46.6cm)		Buy Options	Materials
IPMED198 is a Federal style medallion denoted by an outer ring of beads. It is perfect for powder rooms or halls. This medallion has a diameter of 18-3/8" (46.6cm) with a projection of 1-1/8" (2.86cm).  The center flat area is 5-1/2" (13.97cm).  It is available in ArchPolymerTM (a synthetic plaster) for interior and exterior use.  For Vaulted ceilings specify Flexible ResinMold®. For Commercial and Public Buildings specify Fire Rated ArchPolymerTM or GRG-NeoPlasterTM (real plaster).   Alternate Sizes  IPMED196-12"   IPMED199-24"   IPMED200-31"

Item 29) Oval 18-1/2" x 13-1/2"		Buy Options	Materials
IPNP1002H is a Federal style medallion denoted by inner leaves and a ring of beads. It is perfect for small dining rooms or halls. This medallion is 18-1/2" x 13-1/2" (47 x 34.3cm) with a projection of 2" (5cm).  The center hole can be specified. It is available in ArchPolymerTM (a synthetic plaster) for interior and exterior use.  For Vaulted ceilings specify Flexible ResinMold®. For Commercial and Public Buildings specify Fire Rated ArchPolymerTM or GRG-NeoPlasterTM (real plaster).

Item 30) Oval 18-1/2" x 13-1/2"		Buy Options	Materials
IPNP1002 is a Federal style rosette denoted by inner leaves and a ring of beads. It is perfect for small dining rooms or halls. This medallion is 18-1/2" x 13-1/2" (47 x 34.3cm) with a projection of 2" (5cm).  The center hole can be specified. It is available in ArchPolymerTM (a synthetic plaster) for interior and exterior use.  For Vaulted ceilings specify Flexible ResinMold®. For Commercial and Public Buildings specify Fire Rated ArchPolymerTM or GRG-NeoPlasterTM (real plaster).

Item 31) Diameter 20" (50.8cm)		Buy Options	Materials
IPNP1016 is a Federal style rosette denoted by inner leaves and a ring of Greek Key Patterns. It is perfect for wall or ceiling decoration. This medallion has a diameter of 20" (50.8cm) with a projection of 2" (5cm).  The center flat area is 3-1/2" (8.9cm).  It is available in ArchPolymerTM (a synthetic plaster) for interior and exterior use.  For Vaulted ceilings specify Flexible ResinMold®. For Commercial and Public Buildings specify Fire Rated ArchPolymerTM or GRG-NeoPlasterTM (real plaster).

Item 32) Diameter 20" (50.8cm)		Buy Options	Materials
IPNP1016H is a Federal style medallion denoted by inner leaves and a ring of Greek Key Patterns. It is perfect for most decoration styles. This medallion has a diameter of 20" (50.8cm) with a projection of 2" (5cm).  The center flat area is suitable for a chandelier canopy up to 3-1/2" (8.9cm). The hole is 3" (7.62cm).  It is available in ArchPolymerTM (a synthetic plaster) for interior and exterior use.  For Vaulted ceilings specify Flexible ResinMold®. For Commercial and Public Buildings specify Fire Rated ArchPolymerTM or GRG-NeoPlasterTM (real plaster).

Item 33) Diameter 20-1/4" (51.4cm)		Buy Options	Materials
IPMED110 is a Federal style medallion denoted by a Federal fan pattern with center petals. It is perfect for most decoration styles. This elegant medallion has a diameter of 20-1/4" (51.4cm) with a projection of 1-1/8" (2.86cm).  The center flat area is suitable for a chandelier canopy up to 3-3/4" (9.5cm). The hole is 1-3/8" (2.86cm).  It is available in ArchPolymerTM (a synthetic plaster) for interior and exterior use.  For Vaulted ceilings specify Flexible ResinMold®. For Commercial and Public Buildings specify Fire Rated ArchPolymerTM or GRG-NeoPlasterTM (real plaster).

Item 34) Diameter 20-1/2" (52cm)		Buy Options	Materials
IPNP1050H is a Federal style medallion denoted by concentric rings and a center bead. It is perfect for most decoration and chandelier or fan styles. This medallion has a diameter of 20-1/2" (52cm) with a projection of 1" (2.54cm).  The center flat area is suitable for a chandelier canopy up to 4-1/2" (11.4cm). The hole is the standard 3-3/4" (9.5cm).  It is available in ArchPolymerTM (a synthetic plaster) for interior and exterior use.  For Vaulted ceilings specify Flexible ResinMold®. For Commercial and Public Buildings specify Fire Rated ArchPolymerTM or GRG-NeoPlasterTM (real plaster).

Item 35) Diameter 20-1/2" (52cm)		Buy Options	Materials
IPNP1050 is a Federal style medallion denoted by concentric rings and a center bead. It is perfect for wall and ceiling decoration and chandelier or fan styles. This rosette has a diameter of 20-1/2" (52cm) with a projection of 1" (2.54cm).  The center flat area is suitable for a chandelier canopy up to 4-1/2" (11.4cm). The hole is the standard 3-3/4" (9.5cm).  It is available in ArchPolymerTM (a synthetic plaster) for interior and exterior use.  For Vaulted ceilings specify Flexible ResinMold®. For Commercial and Public Buildings specify Fire Rated ArchPolymerTM or GRG-NeoPlasterTM (real plaster).

Item 36) Diameter 20-3/4" (52.7cm)		Buy Options	Materials
IPMED109 is a Federal style medallion denoted by the Anthemion motif. It is perfect for wall and ceiling decoration and chandelier or fan styles. This medallion has a diameter of 20-3/4" (52.7cm) with a projection of 1" (2.54cm).  The center flat area is suitable for a chandelier on a chain. The hole is 1-1/4" (3.18cm).  It is available in ArchPolymerTM (a synthetic plaster) for interior and exterior use.  For Vaulted ceilings specify Flexible ResinMold®. For Commercial and Public Buildings specify Fire Rated ArchPolymerTM or GRG-NeoPlasterTM (real plaster).

Item 37) Diameter 21" (52.7cm)		Buy Options	Materials
IPMED188 is a Federal style medallion denoted by a running arrow. It is perfect as a ceiling medallion for many styles of chandeliers. This medallion has a diameter of 21" (53.34cm) with a projection of 1" (2.54cm). The hole is 3-7/8" (9.8cm).  It is available in ArchPolymerTM (a synthetic plaster) for interior and exterior use.  For Vaulted ceilings specify Flexible ResinMold®. For Commercial and Public Buildings specify Fire Rated ArchPolymerTM or GRG-NeoPlasterTM (real plaster).

Item 38) Diameter 21" (53.34cm)		Buy Options	Materials
IPMED509 is a Federal style medallion denoted by a running arrow. It is perfect as a ceiling medallion for many styles of chandeliers. This medallion has a diameter of 21" (53.34cm) with a projection of 1-1/4" (3.18cm). The hole is 4" (10cm).  It is available in ArchPolymerTM (a synthetic plaster) for interior and exterior use.  For Vaulted ceilings specify Flexible ResinMold®. For Commercial and Public Buildings specify Fire Rated ArchPolymerTM or GRG-NeoPlasterTM (real plaster).

Item 39) Diameter 21-1/2" (54.7cm)		Buy Options	Materials
IPMED132 is a Federal style medallion denoted by a ring of "bullets". It is perfect as a ceiling medallion for many styles of chandeliers. This medallion has a diameter of 21-1/2" (54.6cm) with a projection of 1-3/4" (4.45cm). The hole is 3-3/4" (9.5cm).  It is available in ArchPolymerTM (a synthetic plaster) for interior and exterior use.  For Vaulted ceilings specify Flexible ResinMold®. For Commercial and Public Buildings specify Fire Rated ArchPolymerTM or GRG-NeoPlasterTM (real plaster).

Item 40) Diameter 22" (58.88cm)		Buy Options	Materials
IPMED507 is a Federal style medallion denoted by a center Acanthus pattern bordered by a ring of beads. It is perfect as a ceiling medallion for many styles of chandeliers. This medallion has a diameter of 22" (55.88cm) with a projection of 2" (5cm). The hole is 3-3/4" (9.5cm).  It is available in ArchPolymerTM (a synthetic plaster) for interior and exterior use.  For Vaulted ceilings specify Flexible ResinMold®. For Commercial and Public Buildings specify Fire Rated GRG-NeoPlasterTM (real plaster). Made in Canada

Item 41)  Diameter 24" (60.9cm)		Buy Options	Materials
IPDP102 is a Federal Style medallion has a diameter of 24" (60.96cm) and a projection of 1-3/8" (3.5cm). It fits a chandelier canopy up to 5-1/2" (13.97cm) which sits on the top of the medallion not through the hole. This exquisite medallion will enhance any sophisticated decor. It is suited for classical chandeliers and modern fixtures. This Federal style is denoted by an a circle of beads on the outer ring. It is available in ArchPolymerTM and custom made in GRGNeoPlasterTM, GFRC-ZeamentTM. Print the PDF Brochure to request a custom quote for options and volume orders  Link to many of our custom options  To Install buy the approved Adhesive and PolySpackling compound to fill any gaps between the ceiling and the medallion. Print the Brochure to request a custom quote for options and volume orders.  Made in Canada

Item 42)  Diameter 24" (60.9cm)		Buy Options	Materials
IPMED514 is a Federal Style medallion has a diameter of 24" (60.96cm) and a projection of 1" (2.54cm). It fits a chandelier canopy up to 4-1/2" (11.4cm) which sits on the top of the medallion not through the hole. This exquisite medallion will enhance any sophisticated decor. It is suited for classical chandeliers and modern fixtures. This Federal style is denoted by an a circle of beads on the outer ring. It is available in ArchPolymerTM and custom made in GRGNeoPlasterTM, GFRC-ZeamentTM. Print the PDF Brochure to request a custom quote for options and volume orders  Link to many of our custom options  To Install buy the approved Adhesive and PolySpackling compound to fill any gaps between the ceiling and the medallion. Print the Brochure to request a custom quote for options and volume orders.  Made in Canada

Item 43)  Diameter 24" (60.9cm)		Buy Options	Materials
IPNP1053 is a Federal Style medallion has a diameter of 24" (60.96cm) and a projection of 1-1/2" (3.8cm). This intricate design is great for walls or ceiling decoration. This Federal style is denoted by palm leaves and an egg and dart ring. It is available in ArchPolymerTM and custom made in GRGNeoPlasterTM, GFRC-ZeamentTM. Print the PDF Brochure to request a custom quote for options and volume orders  Link to many of our custom options  To Install buy the approved Adhesive and PolySpackling compound to fill any gaps between the ceiling and the medallion. Print the Brochure to request a custom quote for options and volume orders.  Made in Canada

Item 43)  Diameter 24" (60.9cm)		Buy Options	Materials
IPNP1053 is a Federal Style medallion has a diameter of 24" (60.96cm) and a projection of 1-1/2" (3.8cm). This intricate design is great for walls or ceiling decoration. This Federal style is denoted by palm leaves and an egg and dart ring. It is available in ArchPolymerTM and custom made in GRGNeoPlasterTM, GFRC-ZeamentTM. Print the PDF Brochure to request a custom quote for options and volume orders  Link to many of our custom options  To Install buy the approved Adhesive and PolySpackling compound to fill any gaps between the ceiling and the medallion. Print the Brochure to request a custom quote for options and volume orders.  Made in Canada

Item 44)  Diameter 24" (60.9cm)		Buy Options	Materials
IPMED199 is a Federal Style medallion has a diameter of 24" (60.96cm) and a projection of 1-1/8" (2.86cm). This Federal style is denoted by a ring of beads. It is available in ArchPolymerTM and custom made in GRGNeoPlasterTM, GFRC-ZeamentTM. Print the PDF Brochure to request a custom quote for options and volume orders  Link to many of our custom options  To Install buy the approved Adhesive and PolySpackling compound to fill any gaps between the ceiling and the medallion. Print the Brochure to request a custom quote for options and volume orders.  Made in Canada

Item 45)  Diameter 24-1/4" (61.6cm)		Buy Options	Materials
IPMED125 is a Federal Style medallion has a diameter of 24-1/4" (61.59cm) and a projection of 1-1/2" (3.8cm). This Federal style is denoted by a ring of egg and dart pattern. It is available in ArchPolymerTM and custom made in GRGNeoPlasterTM, GFRC-ZeamentTM. Print the PDF Brochure to request a custom quote for options and volume orders  Link to many of our custom options  To Install buy the approved Adhesive and PolySpackling compound to fill any gaps between the ceiling and the medallion. Print the Brochure to request a custom quote for options and volume orders.  Made in Canada

Item 46)  Diameter 24-3/8" (61.9cm)		Buy Options	Materials
IPMED201 is a Federal Style medallion has a diameter of 24-3/8" (61.9cm) and a projection of 1-3/4" (4.45cm). This Federal style is denoted by a of torches. It is available in ArchPolymerTM and custom made in GRGNeoPlasterTM, GFRC-ZeamentTM. Print the PDF Brochure to request a custom quote for options and volume orders  Link to many of our custom options  To Install buy the approved Adhesive and PolySpackling compound to fill any gaps between the ceiling and the medallion. Print the Brochure to request a custom quote for options and volume orders.  Made in Canada

Item 47)  Diameter 24-1/4" (61.6cm)		Buy Options	Materials
IPMED127 is a Federal Style medallion has a diameter of 25-1/8" (63.8cm) and a projection of 1-1/8" (2.86cm). The hole is the standard size of 3-3/4" (9.5cm). This Federal style is denoted by a ring of palm leaves with an inner bead. It is available in ArchPolymerTM and custom made in GRGNeoPlasterTM, GFRC-ZeamentTM. Print the PDF Brochure to request a custom quote for options and volume orders  Link to many of our custom options  To Install buy the approved Adhesive and PolySpackling compound to fill any gaps between the ceiling and the medallion. Print the Brochure to request a custom quote for options and volume orders.  Made in Canada

Item 48)  Diameter 25-1/2" (64.77cm)		Buy Options	Materials
IPMED129 is a Federal Style medallion has a diameter of 25-1/2" (64.77cm) and a projection of 1" (2.54cm). The hole is the standard size of 3-1/4" (15.2cm). This Federal style is denoted by a ring of palm leaves with an inner bead. It is available in ArchPolymerTM and custom made in GRGNeoPlasterTM, GFRC-ZeamentTM. Print the PDF Brochure to request a custom quote for options and volume orders  Link to many of our custom options  To Install buy the approved Adhesive and PolySpackling compound to fill any gaps between the ceiling and the medallion. Print the Brochure to request a custom quote for options and volume orders.  Made in Canada

Item 49)  Diameter 27" (68.58cm)		Buy Options	Materials
IPNP1040H is a Federal Style medallion with a diameter of 27" (68.58cm) and a projection of 2-1/2" (6.35cm). The hole is the standard size of 3-1/4" (8.26cm). This Federal style is denoted by a ring of Acanthus leaves. It is available in ArchPolymerTM and custom made in GRGNeoPlasterTM, GFRC-ZeamentTM. Print the PDF Brochure to request a custom quote for options and volume orders  Link to many of our custom options  To Install buy the approved Adhesive and PolySpackling compound to fill any gaps between the ceiling and the medallion.

Item 50)  Diameter 27" (68.58cm)		Buy Options	Materials
IPNP1040 is a Federal Style Rosette with a diameter of 27" (68.58cm) and a projection of 2-1/2" (6.35cm). This style is denoted by a ring of Acanthus leaves. It is available in ArchPolymerTM and custom made in GRGNeoPlasterTM, GFRC-ZeamentTM. Print the PDF Brochure to request a custom quote for options and volume orders  Link to many of our custom options  To Install buy the approved Adhesive and PolySpackling compound to fill any gaps between the ceiling and the medallion. Print the Brochure to request a custom quote for options and volume orders.

Item 51)  Diameter 24" (60.9cm)		Buy Options	Materials
IPMED508 is a Federal Style medallion has a diameter of 27" (68.58cm) and a projection of 1" (2.54cm). The palm leaf pattern is typical of the Federal style. It is available in ArchPolymerTM and custom made in GRGNeoPlasterTM, GFRC-ZeamentTM. Print the PDF Brochure to request a custom quote for options and volume orders  Link to many of our custom options  To Install buy the approved Adhesive and PolySpackling compound to fill any gaps between the ceiling and the medallion. Print the Brochure to request a custom quote for options and volume orders.  Made in Canada

Item 52)  Diameter 29-3/8" (74.6cm)		Buy Options	Materials
IPMED179 is a Federal Style medallion has a diameter of 29-3/8" (74.6cm) and a projection of 1" (2.54cm). The hole is 3-1/4" (8.26cm). The radiating fan pattern is typical of the Federal style. It is available in ArchPolymerTM and custom made in GRGNeoPlasterTM, GFRC-ZeamentTM. Print the PDF Brochure to request a custom quote for options and volume orders  Link to many of our custom options  To Install buy the approved Adhesive and PolySpackling compound to fill any gaps between the ceiling and the medallion. Print the Brochure to request a custom quote for options and volume orders.  Made in Canada

Item 53)  Diameter 29-11/16" (75cm)		Buy Options	Materials
IPMED142H is a Federal Style medallion has a diameter of 29-11/16" (75cm) and a projection of 2-1/4" (5.7cm). The hole is 3-3/4" (9.5cm). The radiating leaf pattern is typical of the Federal style. It is available in ArchPolymerTM and custom made in GRGNeoPlasterTM, GFRC-ZeamentTM. Print the PDF Brochure to request a custom quote for options and volume orders  Link to many of our custom options  To Install buy the approved Adhesive and PolySpackling compound to fill any gaps between the ceiling and the medallion. Print the Brochure to request a custom quote for options and volume orders.  Made in Canada

Item 54)  Diameter 29-11/16" (75cm)		Buy Options	Materials
IPMED142 is a Federal Style medallion-rosette has a diameter of 29-11/16" (75cm) and a projection of 2-1/4" (5.7cm) The radiating leaf pattern is typical of the Federal style. It is available in ArchPolymerTM and custom made in GRGNeoPlasterTM, GFRC-ZeamentTM. Print the PDF Brochure to request a custom quote for options and volume orders  Link to many of our custom options  To Install buy the approved Adhesive and PolySpackling compound to fill any gaps between the ceiling and the medallion. Print the Brochure to request a custom quote for options and volume orders.  Made in Canada

Item 55)  Diameter 30" (76.2cm)		Buy Options	Materials
IPMED139 is a Federal Style medallion has a diameter of 30" (76.2cm) and a projection of 1-1/2" (3.8cm). It fits a chandelier canopy up to 7" (17.8cm) which sits on the top of the medallion not through the hole. This exquisite medallion will enhance any sophisticated decor. It is best suited for classical chandeliers or for an eclectic style with a modern fixture. This Federal neo-classical style is denoted by an Egg and Dart ring. It is available in ArchPolymerTM and custom made in GRGNeoPlasterTM, GFRC-ZeamentTM. Print the PDF Brochure to request a custom quote for options and volume orders  Link to many of our custom options  To Install buy the approved Adhesive and PolySpackling compound to fill any gaps between the ceiling and the medallion. Print the Brochure to request a custom quote for options and volume orders.  Made in Canada

Item 56)  Diameter 30" (76.2cm)		Buy Options	Materials
IPNP1036H is a Federal Style medallion has a diameter of 30" (76.2cm) and a projection of 2" (5cm). It fits a chandelier canopy up to 6" (15.24cm) which sits on the top of the medallion not through the hole. This exquisite medallion will enhance any sophisticated decor. It is suited for classical chandeliers and modern fixtures. This Federal style is denoted by an a circle of beads on the outer ring. It is available in ArchPolymerTM and custom made in GRGNeoPlasterTM, GFRC-ZeamentTM. Print the PDF Brochure to request a custom quote for options and volume orders  Link to many of our custom options  To Install buy the approved Adhesive and PolySpackling compound to fill any gaps between the ceiling and the medallion. Print the Brochure to request a custom quote for options and volume orders.

Item 59)  Diameter 30" (76.2cm)		Buy Options	Materials
IPNP1036 is a Federal Style Patera with a diameter of 30" (76.2cm) and a projection of 2" (5cm). As a rosette it can be mounted to a wall or ceiling. Optional holes are available to specified size. This Federal style is denoted by an a circle of beads on the outer ring. It is available in ArchPolymerTM and custom made in GRGNeoPlasterTM, GFRC-ZeamentTM. Print the PDF Brochure to request a custom quote for options and volume orders  Link to many of our custom options  To Install buy the approved Adhesive and PolySpackling compound to fill any gaps between the ceiling and the medallion. Print the Brochure to request a custom quote for options and volume orders.

Item 60)  Diameter 31" (78.7cm)		Buy Options	Materials
IPMED200 is a Federal Style medallion has a diameter of 31" (78.74cm) and a projection of 1-1/8" (2.8cm). It fits a chandelier canopy up to 6" (15.24cm) which sits on the top of the medallion not through the hole.  It is suited for classical chandeliers and modern fixtures. This Federal style is denoted by an a circle of running beads on the outer ring. It is available in ArchPolymerTM and custom made in GRGNeoPlasterTM, GFRC-ZeamentTM. Print the PDF Brochure to request a custom quote for options and volume orders  Link to many of our custom options  To Install buy the approved Adhesive and PolySpackling compound to fill any gaps between the ceiling and the medallion. Print the Brochure to request a custom quote for options and volume orders.

Item 61)  Diameter 31" (78.7cm)		Buy Options	Materials
IPMED202 is a Federal Style medallion has a diameter of 31" (78.74cm) and a projection of 1-1/8" (2.8cm). It fits a chandelier canopy up to 6" (15.24cm) which sits on the top of the medallion not through the hole.  It is suited for classical chandeliers and modern fixtures. This Federal style is denoted by an a band of fans and palmettes on the outer ring. It is available in ArchPolymerTM and custom made in GRGNeoPlasterTM, GFRC-ZeamentTM. Print the PDF Brochure to request a custom quote for options and volume orders  Link to many of our custom options  To Install buy the approved Adhesive and PolySpackling compound to fill any gaps between the ceiling and the medallion. Print the Brochure to request a custom quote for options and volume orders.  Alternate Size IPMED201-24"

Item 62)  Diameter 31" (78.7cm)		Buy Options	Materials
IPMED141 is a Federal Style medallion has a diameter of 31" (78.74cm) and a projection of 2-1/8" (5.4cm). It fits a chandelier canopy up to 5-1/4" (13.34cm) which sits on the top of the medallion not through the hole.  It is suited for classical chandeliers and modern fixtures. This Federal style is denoted by a ring of Reed and Ribbon. It is available in ArchPolymerTM and custom made in GRGNeoPlasterTM, GFRC-ZeamentTM. Print the PDF Brochure to request a custom quote for options and volume orders  Link to many of our custom options  To Install buy the approved Adhesive and PolySpackling compound to fill any gaps between the ceiling and the medallion.

Item 63)  Diameter 32-1/2" (82.55cm)		Buy Options	Materials
IPMED148 is a Federal Style medallion has a diameter of 32-1/2" (82.55cm) and a projection of 2-1/2" (6.35cm). It fits a chandelier canopy up to 5" (12.7cm) which sits on the top of the medallion not through the hole.  It is suited for classical chandeliers and modern fixtures. This Federal style is denoted by a rings of Swirls and Ribbons. It is available in ArchPolymerTM and custom made in GRGNeoPlasterTM, GFRC-ZeamentTM. Print the PDF Brochure to request a custom quote for options and volume orders  Link to many of our custom options  To Install buy the approved Adhesive and PolySpackling compound to fill any gaps between the ceiling and the medallion. Similar medallion: IPMED164-44-1/2"

Item 64)  Diameter 35" (88.8cm)		Buy Options	Materials
IPMED172 is a Federal Style medallion has a diameter of 35" (88.8cm) and a projection of 1-1/2" (2.8cm). It fits a chandelier canopy up to 6" (15.2cm) which sits on the top of the medallion not through the hole.  It is suited for classical chandeliers and modern fixtures. This Federal style is denoted by a radiating Palm Leaves with a smooth outer ring. It is available in ArchPolymerTM and custom made in GRGNeoPlasterTM, GFRC-ZeamentTM. Print the PDF Brochure to request a custom quote for options and volume orders  Link to many of our custom options  To Install buy the approved Adhesive and PolySpackling compound to fill any gaps between the ceiling and the medallion.

Item 65)  Diameter 35" (88.8cm)		Buy Options	Materials
IPNP1063 is a Federal Style medallion has a diameter of 35" (88.8cm) and a projection of 3" (7.62cm). It fits a chandelier canopy up to 6" (15.2cm) which sits on the top of the medallion not through the hole.  It is suited for classical chandeliers and modern fixtures. This Federal style is denoted by a radiating Palm Leaves with a smooth outer ring. It is available in ArchPolymerTM and custom made in GRGNeoPlasterTM, GFRC-ZeamentTM. Print the PDF Brochure to request a custom quote for options and volume orders  Link to many of our custom options  To Install buy the approved Adhesive and PolySpackling compound to fill any gaps between the ceiling and the medallion.

Item 66)  Diameter 35-3/4" (90.8cm)		Buy Options	Materials
IPNP1052H is a Federal Style medallion has a diameter of 35-3/4" (90.8cm) and a projection of 2" (5cm). It fits a chandelier canopy up to 7-1/2" (12.7cm) which sits on the top of the medallion not through the hole.  It is suited for classical chandeliers and modern fixtures. This Federal style is denoted by a radiating Palm Leaves with a reed and ribbon outer ring. It is available in ArchPolymerTM and custom made in GRGNeoPlasterTM, GFRC-ZeamentTM. Print the PDF Brochure to request a custom quote for options and volume orders  Link to many of our custom options  To Install buy the approved Adhesive and PolySpackling compound to fill any gaps between the ceiling and the medallion.

Item 67)  Diameter 35-3/4" (90.8cm)		Buy Options	Materials
IPNP1052 is a Federal Style medallion-rosette has a diameter of 35-3/4" (90.8cm) and a projection of 2" (5cm). It is perfect for wall and ceiling decor. This Federal style is denoted by a radiating Palm Leaves with a reed and ribbon outer ring. It is available in ArchPolymerTM and custom made in GRGNeoPlasterTM, GFRC-ZeamentTM. Print the PDF Brochure to request a custom quote for options and volume orders  Link to many of our custom options  To Install buy the approved Adhesive and PolySpackling compound to fill any gaps between the ceiling and the medallion.

Options: Hole Size-Split  Materials  Factory Painted  Metal Coated  FireRated
* All Prices, Exchange and Specifications Subject to Change without Notice    * All designs & content copyrighted 2025 ImperialProductions® or Permissions Granted

Options: Hole Size-Split  Materials  Factory Painted  Metal Coated  FireRated
* All Prices, Exchange and Specifications Subject to Change without Notice    * All designs & content copyrighted 2025 ImperialProductions® or Permissions Granted

Item 70)  Diameter 37-1/2" (95.25cm)		Buy Options	Materials
IPNP1033 is a Federal Style medallion has a diameter of 37-1/2" (95.25cm) and a projection of 1-1/2" (8.9cm). It is perfect for wall and ceiling decoration. This Federal style is denoted by a classic Federal symbols. It is available in ArchPolymerTM and custom made in GRGNeoPlasterTM, GFRC-ZeamentTM. Print the PDF Brochure to request a custom quote for options and volume orders  Link to many of our custom options  To Install buy the approved Adhesive and PolySpackling compound to fill any gaps between the ceiling and the medallion.

Item 71)  Diameter 37-1/2" (95.25cm)		Buy Options	Materials
IPNP1033H is a Federal Style medallion has a diameter of 37-1/2" (95.25cm) and a projection of 1-1/2" (8.9cm). It fits a chandelier canopy up to 5-1/2" (13.97cm) which sits on the top of the medallion not through the hole.  It is suited for classical chandeliers and modern fixtures. This Federal style is denoted by classic Federal Symbols. It is available in ArchPolymerTM and custom made in GRGNeoPlasterTM, GFRC-ZeamentTM. Print the PDF Brochure to request a custom quote for options and volume orders  Link to many of our custom options  To Install buy the approved Adhesive and PolySpackling compound to fill any gaps between the ceiling and the medallion.

Item 72)  Diameter 44-1/2" (113cm)		Buy Options	Materials
IPMED164 is a Federal Style medallion has a diameter of 44-1/2" (113cm) and a projection of 1-5/8" (4.13cm). It fits a chandelier canopy up to 6-7/8" (15.2cm) which sits on the top of the medallion not through the hole.  It is suited for classical chandeliers and modern fixtures. This Federal style is denoted by rings of swirls and ribbon & reed. It is available in ArchPolymerTM and custom made in GRGNeoPlasterTM, GFRC-ZeamentTM. Print the PDF Brochure to request a custom quote for options and volume orders  Link to many of our custom options  To Install buy the approved Adhesive and PolySpackling compound to fill any gaps between the ceiling and the medallion. Similar medallion: IPMED148-32-1/2"

Item 73)  Diameter 44-9/16" (113.2cm)		Buy Options	Materials
IPMED180 is a Federal Style medallion has a diameter of 44-9/16" (113.2cm) and a projection of 1-7/8" (4.76cm). It fits a chandelier canopy up to 4" (10cm) which sits on the top of the medallion not through the hole.  It is suited for classical chandeliers and modern fixtures. This Federal style is denoted by torches and palm leaves. It is available in ArchPolymerTM and custom made in GRGNeoPlasterTM, GFRC-ZeamentTM. Print the PDF Brochure to request a custom quote for options and volume orders  Link to many of our custom options  To Install buy the approved Adhesive and PolySpackling compound to fill any gaps between the ceiling and the medallion.

Item 74)  Diameter 45" (114.3cm)		Buy Options	Materials
IPMED183 is a Federal Style medallion has a diameter of 45" (114.3cm) and a projection of 1-7/16" (3.6cm). It fits a chandelier canopy up to 5" (12.7cm) which sits on the top of the medallion not through the hole.  It is suited for classical chandeliers and modern fixtures. This Federal style is denoted by radiating Fans and Center Flower Petals. It is available in ArchPolymerTM and custom made in GRGNeoPlasterTM, GFRC-ZeamentTM. Print the PDF Brochure to request a custom quote for options and volume orders  Link to many of our custom options  To Install buy the approved Adhesive and PolySpackling compound to fill any gaps between the ceiling and the medallion.

Options: Hole Size-Split  Materials  Factory Painted  Metal Coated  FireRated
* All Prices, Exchange and Specifications Subject to Change without Notice    * All designs & content copyrighted 2025 ImperialProductions® or Permissions Granted  * Made in Canada

Options: Hole Size-Split  Materials  Factory Painted  Metal Coated  FireRated
* All Prices, Exchange and Specifications Subject to Change without Notice    * All designs & content copyrighted 2025 ImperialProductions® or Permissions Granted    * Made in Canada

Options: Hole Size-Split  Materials  Factory Painted  Metal Coated  FireRated
* All Prices, Exchange and Specifications Subject to Change without Notice    * All designs & content copyrighted 2025 ImperialProductions® or Permissions Granted    * Made in Canada

Item 78)  58 x 45-1/2" (147 x 115.6cm)		Buy Options	Materials
IPMED510 is a Federal Style medallion is 58" x 45" (147 x 115.6cm) and a projection of 1" (2.545cm). It fits a chandelier canopy up to 6" (15.24cm) which sits on the top of the medallion not through the hole.  It is suited for classical chandeliers and modern fixtures. This Federal style is denoted by radiating Fans and a Fluted Ring. It is available in ArchPolymerTM and custom made in GRGNeoPlasterTM, GFRC-ZeamentTM. Print the PDF Brochure to request a custom quote for options and volume orders  Link to many of our custom options  To Install buy the approved Adhesive and PolySpackling compound to fill any gaps between the ceiling and the medallion.

Chandelier and Pot Light Examples

Approved Install Products

How to Order
By Phone	1-800-399-7585
By Email	sales@imperialproductions.com
Our Shop =>
Trade Enquiry	Register for Stocking Trade Program

Back to Main Medallion Page